ตัวกรองผลการค้นหา
หรือคุณกำลังค้นหา Couple:, Stiffness:, Banded Structure, Banding, Slip Form, Backward Extrusion, Burr, Resultant:
direction
แปลว่าทิศทาง
direction finder
แปลว่าเครื่องสอบทิศทางโดยอาศัยคลื่นวิทยุ
direction indicator
แปลว่าไฟสัญญาณต่างๆ ของรถ เช่น ไฟเลี้ยว ไฟห้ามล้อ
direction signal
แปลว่า(รถยนต์) สัญญาณไฟยกเลี้ยวที่ใช้อยู่ในรถยนต์
Couple:
แปลว่า(english) A system of forces composed of two equal forces of opposite direction, offset by a distance. A couple is statically equivalent to a moment whose magnitude equals the magnitude of the force times the offset distance.
Stiffness:
แปลว่า(english) This is a general term which may be applied to materials or structures. When a force is applied to a structure, there is a displacement in the direction of the force; stiffness is the ratio of the force divided by the displacement. High stiffness means that a large force produces a small displacement. When discussing the stiffness of a material, the concept is the same, except that stress substitutes for force, and strain substitutes for displacement; see modulus of elasticity.
Banded Structure
แปลว่า(english) Appearance of a metal showing parallel bands in the direction of rolling or working
Banding
แปลว่า(english) Inhomogeneous distribution of alloying elements or phases aligned in filaments or plates parallel to the direction of working.
Slip Form
แปลว่า(Concrete Engineering) A form which is raised or pulled as concrete is placed; may move vertically to form wails, stacks, bins or silos, usually of uniform cross section from bottom to top; or a generally horizontal direction to lay concrete evenly for highways, on slopes and inverts of canals, tunnels, and siphons.
Backward Extrusion
แปลว่า(english) Forcing metal to flow in a direction opposite to the motion of a punch or die.
direction-finder
แปลว่าเครื่องตรวจสอบทิศทางโดยวิทยุ
Burr
แปลว่า(english) The very subtle ridge on the edge of strip steel left by cutting operations such as slitting, trimming, shearing, or blanking. For example, as a steel processor trims the sides of the sheet steel parallel or cuts a sheet of steel into strips, its edges will bend with the direction of the cut.