ผลการค้นหา

Base Metal

แปลว่า(english) (1) The metal present in the largest proportion in an alloy; (2) the metal to be brazed, cut or welded; (3) after welding the part of the metal that was not melted during the process.

A Sheet Metal Screw

แปลว่า(english) Sheet metal screws with (a) sharp-pointed ends; and (b) fewer threads per inch than type AB screws; and (c) deeper threads with bettere gripping power than type AB. The industrial Fasteners Institue incorrectly labes type A an “obsolete” thread though it is universally preferred in 18-8 stainless over type AB, especially by the marine industry.

Bimetal

แปลว่า(english) Casting, usually centrifugal, made of two different metals, fused together.

metal tubing

แปลว่าท่อโลหะ, แป๊บโลหะ

Ia, ia metal

แปลว่าโลหะผสมของทองแดงกับนิเกิ้ลที่ฝังอยู่ในตัวเครื่องมือที่เกี่ยวกับการไฟฟ้าช่วยให้มีประสิทธิภาพของอุณหภูมิต่ำของการต้านทาน

Billet

แปลว่า(english) (1) A semi-finished section hot rolled from a metal ingot, with a rectangular cross section usually ranging from 16 to 36 in., the width being less than twice the thickness. Where the cross section exceeds 36 in., the term “bloom” is properly but not universally used. Sizes smaller than 16 in. are usually termed “bars”; a solid semi-finished round or square product which has been hot worked by forging, rolling, or extrusion. (2) A semi-finished, cogged, hot rolled or continuous-cast metal product of uniform section, usually rectangular with radiused corners. Billets are relatively larger than bars.

non metal

แปลว่า(เคมี) ธาตุแท้ชนิดหนึ่งไม่เป็นโลหะ, เป็นวัตถุที่ไม่เป็นสื่อกระแสไฟฟ้า

Metabolism

แปลว่า(Environmental Engineering) The processes which sustain an organism, including energy production, synthesis of proteins for repair and replication.

fahlum metal

แปลว่า(โลหะ) ชื่อโลหะผสมสีขาวชนิดหนึ่ง ใช้ในการประดิษฐ์เครื่องเพชรพลอยราคาถูก มีส่วนประกอบของดีบุก 40 เปอรเซนต์ กับตะกั่ว 60 เปอรเซนต์

Slump Cone

แปลว่า(Concrete Engineering) A metal mold in the form of a truncated cone with a top diameter of 4”, a bottom diameter of 8”, and a height of 12”, used to fabricate the specimen for a slump test.

Break Test (for tempered steel)

แปลว่า(english) A method of testing hardened and tempered high carbon spring steel strip wherein the specimen is held and bent across the grain in a vice-like calibrated testing machine. Pressure is applied until the metal fractures at which point a reading is taken and compared with a standard chart of brake limitations for various thickness ranges.

Boil

แปลว่า(english) Agitation of a bath of metal caused by the liberation of a gas beneath its surface. May be deliberately induced by the addition of oxidizing material to a bath containing excess carbon. In the later case it is called a carbon boil and CO or CO2 are liberated.