ผลการค้นหา

คำศัพท์/สำนวน บทความ  หาอะไรก็เจอ!
ค้นเจอ 734 รายการ

 หรือคุณกำลังค้นหา Abrasion 1, Stratosphere, Connection:, Rebound, Influent, Temperature Rise, Abrasive Wear, Blacking Hole, Gas stripping, Phosphorylation, Spall, Binary Alloy

Bruise

แปลว่า(english) A mark transferred to the strip surface from a defective process roll. Similar to dent or punchmark.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Centroid:

แปลว่า(english) Similar to the concept of center of gravity, except that it applies to a two dimensional shape rather than an object. For a given shape, the centroid location corresponds to the center of gravity for a thin flat plate of that shape, made from a homogeneous material.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Make-buy decision

แปลว่า(Software Engineering) determining whether software should be built internally, acquired, contracted or built from reusable components
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Blank 2

แปลว่า(english) A piece of stock (also call a “slug” or “multiple”) from which a forging is to be made.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Decomposers

แปลว่า(Environmental Engineering) Organisms which utilize energy from wastes or dead organisms. Decomposers complete the cycle by returning nutrients to the soil or water and carbon dioxide to the air or water.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Automatic code generation

แปลว่า(Software Engineering) tools that generate source code from a representation of software that is not source code
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Fixed suspended solids

แปลว่า(Environmental Engineering) (FSS) is the matter remaining from the suspended solids analysis which will not burn at 550°C. It represents the non-filterable inorganic residue in a sample.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Billet

แปลว่า(english) (1) A semi-finished section hot rolled from a metal ingot, with a rectangular cross section usually ranging from 16 to 36 in., the width being less than twice the thickness. Where the cross section exceeds 36 in., the term “bloom” is properly but not universally used. Sizes smaller than 16 in. are usually termed “bars”; a solid semi-finished round or square product which has been hot worked by forging, rolling, or extrusion. (2) A semi-finished, cogged, hot rolled or continuous-cast metal product of uniform section, usually rectangular with radiused corners. Billets are relatively larger than bars.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Rock Pocket

แปลว่า(Concrete Engineering) Area or portion of hardened concrete which is deficient in mortar and consisting primarily of coarse aggregate and open voids; caused by insufficient consolidation or separation during placement, or both; by leakage from form.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Condensation

แปลว่า(Concrete Engineering) When a moisture laden gas comes in contact with a cooler surface a change of state from gaseous to liquid occurs.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Colloids

แปลว่า(Environmental Engineering) Small particles which have a negligible settling velocity. These particles have a very small mass so gravitational force is low compared to surface frictional forces. Typical colloidal sizes range from 10-3 mm to 1 mm.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Oxidative phosphorylation

แปลว่า(Environmental Engineering) The synthesis of the energy storage compound adenosine triphosphate (ATP) from adenosine diphosphate (ADP) using a chemical substrate and molecular oxygen.
 ศัพท์ช่างภาษาอังกฤษ – ไทย