ตัวกรองผลการค้นหา
spin start
แปลว่าการติดเครื่องด้วยวิธีหมุนหรือใช้เชือกรั้งให้หมุนแบบเครื่องยนต์ติดท้าย
shear stress along grain
แปลว่าหน่วยแรงเฉือนขนานเสี้ยน
Broaching 2
แปลว่า(english) Multiple shaving, accomplished by pushing a tool with stepped cutting edges along the piece, particularly through holes.
Axial force:
แปลว่า(english) A system of internal forces whose resultant is a force acting along the longitudinal axis of a structural member or assembly.
Transmissibility:
แปลว่า(english) The principle stating that a force has the same external effect on an object regardless of where it acts along its line of action.
Pumping (of Pavements)
แปลว่า(Concrete Engineering) The ejection of a mixture of water and solid materials such as clay or silt along cracks, transverse or longitudinal joints, and along pavement edges caused by downward slab movement due to the passage of heavy loads, machinery or equipment over the pavement after free water has accumulated in or on the subbase, subgrade or basecourse.
Bearing Load
แปลว่า(english) A compressive load supported by a member, usually a tube or collar, along a line where contact is made with a pin, rivet, axle, or shaft.
Line of Action:
แปลว่า(english) The line of action of a force is the infinite line defined by extending along the direction of the force from the point where the force acts.
Plane of Weakness
แปลว่า(Concrete Engineering) The plane along which a structure under stress will tend to fracture; may exist because of the nature of the structure and its loading, by accident, or by design.
Concentrated force:
แปลว่า(english) A force considered to act along a single line in space. Concentrated forces are useful mathematical idealizations, but cannot be found in the real world, where all forces are either body forces acting over a volume or surface forces acting over an area.
Normal strain:
แปลว่า(english) Strain measuring the intensity of deformation along an axis. Normal strain is usually denoted by . Average normal strain between two points is calculated as (Delta L / L), where L is the original distance between the points, and L is the change in that distance. Normal strain is often simply called strain.