ผลการค้นหา

Billet

แปลว่า(english) (1) A semi-finished section hot rolled from a metal ingot, with a rectangular cross section usually ranging from 16 to 36 in., the width being less than twice the thickness. Where the cross section exceeds 36 in., the term “bloom” is properly but not universally used. Sizes smaller than 16 in. are usually termed “bars”; a solid semi-finished round or square product which has been hot worked by forging, rolling, or extrusion. (2) A semi-finished, cogged, hot rolled or continuous-cast metal product of uniform section, usually rectangular with radiused corners. Billets are relatively larger than bars.

Billet 2

แปลว่า(english) A solid semi-finished round or square product that has been hot worked by forging, rolling, or extrusion. An iron or steel billet has a minimum width or thickness of 1 1/2 in. and the cross-sectional area varies from 2 1/4 to 36 sq. in. For nonferrous metals, it may also be a casting suitable for finished or semi-finished rolling or for extrusion.

semi-conductor

แปลว่าชื่อที่เรียกวัตถุที่มีกำลังความถี่ในการถ่ายทอดกระแสไฟฟ้า และมีความเป็นกลางในระหว่างไฟฟ้าและฉนวน

Bloom 2

แปลว่า(english) A semi-finished hot rolled product, rectangular in cross section, produced on a blooming mill. For iron and steel, the width is not more than twice the thickness, and the cross-sectional area is usually not less than 36 sq. in. Iron and steel blooms are sometimes made by forging.

Bent Axis Pumps

แปลว่า(english) In this pump, the pistons are at an angle to the drive shaft and Thrust Plate. The piston block shaft is connected to the drive shaft by a universal joint, not shown. The drive shaft, thrust plate, piston block shaft, and piston block all revolve. The connecting rods are attached to the thrust plate and revolve with it, unlike the swash plate pump where the piston rods slide past a stationary swash plate. The outlet ports are semi-circular holes in the Valve Plate, shown on the far right of the animation on edge and in a head-on view below, right. As the pump revolves, half the pistons suck in fluid as they pass over the intake port. The other pistons discharge their fluid through the outlet port. This pump should be compared to the radial piston pump, swash plate pump, and wobble pump.

semi-detached house

แปลว่าอาคารหรือบ้าน 2 หลัง ปลูกติดกัน, บ้านแฝด

semi-elliptic

แปลว่ารูปโค้งกึ่งวงกลมรูปไข่ (เช่น แหนบรถชนิดโค้งของรถ = semi - elliptic type of leaf spring)

semi-cirular arch

แปลว่า(สถาปัตย) ซุ้มโค้งครึ่งวงกลม คือ ส่วนโค้งของพื้นผิวด้านใต้ท้องซุ้ม เป็นส่วนโค้งครึ่งวงกลม

semi-distaed building

แปลว่าอาคารสองหลัง ที่ปลูกติดกันคล้ายเรือนแฝด, อาคารแฟด

Wetland

แปลว่า(Environmental Engineering) Semi-aquatic land, that is land that is either inundated or saturated by water for varying periods of time during each year, and that supports aquatic vegetation which is specifically adapted for saturated soil conditions.

semi-circle

แปลว่าครึ่งวงกลม, กึ่งวงกลม

semi-circular arch

แปลว่าซุ้มโค้งครึ่งวงกลม