ผลการค้นหา

คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 98 รายการ

Defect amplification

แปลว่า(Software Engineering) when a defect is introduced early in the software process and remains undetected, it often is amplified into multiple defects later in the software process

Deflection:

แปลว่า(english) This word usually carries the same meaning as displacement, although it is sometimes used in place of deformation.

Bruise

แปลว่า(english) A mark transferred to the strip surface from a defective process roll. Similar to dent or punchmark.

Strength:

แปลว่า(english) A very general term that may be applied to a material or a structure. In a material, strength refers to a level of stress at which there is a significant change in the state of the material, e.g., yielding or rupture. In a structure, strength refers to a level of level of loading which produces a significant change in the state of the structure, e.g., inelastic deformations, buckling, or collapse.

indefinite number

แปลว่าจำนวนที่นับไม่ถ้วน, จำนวนที่ไม่แน่นอน

Elastic energy:

แปลว่า(english) The energy stored in deformed elastic material (e.g., a watch spring). Elastic energy equals where k is the stiffness, and is the associated deflection. Elastic energy is sometimes called elastic potential energy because it can be recovered when the object returns to its original shape; see potential energy.

Brittle:

แปลว่า(english) A brittle structure or material exhibits low ductility, meaning that it exhibits very little inelastic deformation before complete failure.

Degree of Freedom:

แปลว่า(english) A displacement quantity which defines the shape and location of an object. In the two dimensional plane, a rigid object has three degrees of freedom: two translations and one rotation. In three dimensional space, a rigid object has six degrees of freedom (three translations and three rotations).

Blow Back

แปลว่า(english) A coating defect consisting of a lower coating film weight on the bottom of the coated sheet caused by high velocity air in the oven. Blow back usually occurs with high solids coatings which have little solvent to evaporate and "set" the film.

undeformed state

แปลว่าสถานะคงรูป

fail to remedy defect

แปลว่าละเลยในการแก้ไขความชำรุดบกพร่อง

Elastic limit:

แปลว่า(english) The point beyond which the deformations of a structure or material are no longer purely elastic.

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด