ผลการค้นหา

คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 29 รายการ

 หรือคุณกำลังค้นหา Bending Angle, Bend Test, return bend, quarter bend, Burr, bend, hairpin-bend, cold bend, knuckle bend, Bend Radius

Bending Angle

แปลว่า(english) A 'V-shaped' piece of angle iron attached to the rear of the coil car in the Strip Steel, which is used to help the operator put bends into the front end of a coil.

Bend Test

แปลว่า(english) Various tests which is used to ascertain the toughness and ductility of a metal product, in which the material is bent around its axis and/ or around an outside radius. A complete test might specify such a bend to be both with and against the direction of grain. For testing, samples should be edge filed to remove burrs and any edgewise cracks resulting from slitting or shearing. If a vice is to be employed, then you must line the jaws with some soft metal, to permit a flow of the metal in the piece being tested.

Brake Press Bending

แปลว่า(english) An operation which produces various degree bends when fabricating parts from steel.

Bending

แปลว่า(english) A preliminary forging operation to give the piece approximately the correct shape for subsequent forming.

Bending moment:

แปลว่า(english) A system of internal forces whose resultant is a moment. This term is most commonly used to refer to internal forces in beams.

bending stiffness

แปลว่าสติฟเนสการดัด

Black Oil Tempered Spring Steel Strip (Scaleless Blue)

แปลว่า(english) A flat cold rolled usually .70/.80 medium high carbon steel strip, blue-black in color, which has been quenched in oil and drawn to desired hardness. While it looks and acts much like blue tempered spring steel and carries a Rockwell hardness of C44/47, it has not been polished and is lower in carbon content. Used for less exacting requirements than clock spring steel, such as snaps, lock springs, hold down springs, trap springs, etc. It will take a more severe bend before fracture than will clock spring, but it does not have the same degree of spring-back.

return bend

แปลว่า(ประปา) ท่อประปาที่ดัดรูปโค้งเป็นอักษร U

Bending Strength

แปลว่า(english) Upper limit of normal stress of a beam at which fracture or excessive plastic deformation occurs.

bending test

แปลว่าทดสอบความเหนียว

Flexure:

แปลว่า(english) Bending deformation, i.e., deformation by increasing curvature.

bend

แปลว่าข้องอ ท่อสั้นโค้ง

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด