ตัวกรองผลการค้นหา
thrust
แปลว่าแรงผลัก [ไฟฟ้ากำลัง]; แรงผลักดัน [ศัพท์พลังงาน]
thrust tearing
แปลว่า(เครื่องจักร) ตุ๊กตาตั้งรับแรงกดดันของปลายเพลา
thrust collar
แปลว่าปลอกยันฝาสลักไดนาโมของแกนทุ่นอาร์มาเชอร์
against
แปลว่าตัดกับ (ผนัง), ทวน (น้ำ), ตรงกันข้าม, กั้น, ปะทะ
Insurance against Injury to Persons and Damage to Property
แปลว่าประกันการบาดเจ็บของบุคคล และความเสียหายของทรัพย์สิน
Butt Welding
แปลว่า(english) Joining two edges or ends by placing one against the other and welding them.
Bolster (die block)
แปลว่า(english) A “tool” or reinforcing part which supports the backer-which, in turn, supports an extruding die against the pressure of extrusion.
Backer (back-up plate)
แปลว่า(english) A “tool” or reinforcing part, which presses against the outer surface of an extrusion die, supporting it against the pressure of the extruding metal. The backer has an opening larger than the die aperture, allowing the extruded product to emerge without marring its soft surface.
Cold Joint
แปลว่า(Concrete Engineering) A visible lineation which forms when the placement of concrete is delayed. The concrete in place hardens prior to the next placement of concrete against it.
Bent Axis Pumps
แปลว่า(english) In this pump, the pistons are at an angle to the drive shaft and Thrust Plate. The piston block shaft is connected to the drive shaft by a universal joint, not shown. The drive shaft, thrust plate, piston block shaft, and piston block all revolve. The connecting rods are attached to the thrust plate and revolve with it, unlike the swash plate pump where the piston rods slide past a stationary swash plate. The outlet ports are semi-circular holes in the Valve Plate, shown on the far right of the animation on edge and in a head-on view below, right. As the pump revolves, half the pistons suck in fluid as they pass over the intake port. The other pistons discharge their fluid through the outlet port. This pump should be compared to the radial piston pump, swash plate pump, and wobble pump.
Blast Cleaning (blasting)
แปลว่า(english) A process for cleaning or finishing metal objects by use of an air jet or centrifugal wheel that propels abrasive particles (grit, sand, or shot) against the surfaces of the workpiece at high velocity.
Blasting (Blast Cleaning)
แปลว่า(english) A process for cleaning or finishing metal objects by use of an air blast or centrifugal wheel that throws abrasive particles against the surface of the work pieces. Small, irregular particles of steel or iron are used as the abrasive in grit blasting, and steel or iron balls in shot blasting.