ค้นเจอ 14 รายการ

pimple

แปลว่า( วัตถุหล่อ ) รูหรือรอยเป็นพรุนบนผิววัตถุที่หล่อเสร็จแล้ว ซึ่งถือว่าไม่เป็นสิ่งที่พึงประสงค์

large knot

แปลว่า(ไม้) ปุ่มไม้แข็งที่เป็นปุ่มก้อนโต วัดเส้นผ่าศูนย์กลางมากกว่าหนึ่งนิ้วครึ่ง

large areas

แปลว่าที่ดินกว้างใหญ่, เนื้อที่กว้างขวาง

Bull Gear

แปลว่า(english) The large crank gear of a shaper.

Burnt Rubber

แปลว่า(english) Small or large black spots that generally show up on surface and are generally caused by pickling steel too hot.

Data warehouse

แปลว่า(Software Engineering) a large, independent database that has access to databases that serve many different applications that are required by a business

Adapters

แปลว่า(english) Steel segments that are bolted to the reel mandrel to increase their diameter so that large (24" ID) coils can be run.

Bandsaw

แปลว่า(english) A power saw, the blade of which is a continuous,narrow,steel band having teeth on one edge and passing over two large pulley wheels.

Stability:

แปลว่า(english) Stability is best defined as the opposite of instability, which is the occurrence of large structural deformations which are not the result of material failure.

Baller Stick

แปลว่า(english) Octagon-shaped wooden stick approximately 5' long. This stick is used in the baller area, to change burr mashers, to start a coil with a large ID, etc.

Flexibility:

แปลว่า(english) Flexibility is the inverse of stiffness. When a force is applied to a structure, there is a displacement in the direction of the force; flexibility is the ratio of the displacement divided by the force. High flexibility means that a small load produces a large displacement.

Batch Anneal

แปลว่า(english) The process by which a large, stationary stack of steel coils (4 coils high) is subjected to a long heat-treating cycle. This process enables the cold-rolled sheet to fully recrystallize into the softest possible product conforming to customer specifications. Controlling the recrystallization process makes a fine-grained microstructure easy to obtain, and minimizes the tendencies for retention of directional properties of the rolled steel which could produce undesirable shapes in the stamping of a cylindrical part such as a can. Also see Anneal and Continuous Anneal.

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z