ผลการค้นหา

Attached growth reactor

แปลว่า(Environmental Engineering) A reactor in which the microorganisms are attached to engineered surfaces within the reactor. Examples of attached growth reactors are the trickling filter and the rotating biological contactor. See suspended growth reactor.

Suspended growth reactor

แปลว่า(Environmental Engineering) A reactor in which the microorganisms are suspended in the wastewater. Examples of suspended growth reactors are activated sludge reactors and anaerobic digesters. See attached growth reactor.

reactor

แปลว่าเครื่องต้านทานกระแสไฟฟ้าสลับ, เครื่องแยกปรมาณู

Trickling filter

แปลว่า(Environmental Engineering) An attached growth biological process in which the microbial film is attached to non-moving rock or plastic media.

Builtup Plate

แปลว่า(english) "A pattern plate of suitable material, with the cope pattern mounted on or attached to one side; the drag pattern may be attached to the other side or to a separate mounting. See Matchplate "

Biofilm

แปลว่า(Environmental Engineering) A film of microorganisms attached to a surface, such as that on a trickling filter, rotating biological contactor, or rocks in natural streams.

Bending Angle

แปลว่า(english) A 'V-shaped' piece of angle iron attached to the rear of the coil car in the Strip Steel, which is used to help the operator put bends into the front end of a coil.

Vibration

แปลว่า(Concrete Engineering) Energetic agitation of concrete to assist in its consolidation, produced by mechanical oscillating devices at moderately high frequencies. (A.) External vibration employs a device attached to the forms and is particularly applicable to the manufacture of precast items and for the vibration of tunnel lining forms. (B.) Internal vibration employs an element which can be inserted into the concrete; and is more generally used for cast-in-place construction.

Bent Axis Pumps

แปลว่า(english) In this pump, the pistons are at an angle to the drive shaft and Thrust Plate. The piston block shaft is connected to the drive shaft by a universal joint, not shown. The drive shaft, thrust plate, piston block shaft, and piston block all revolve. The connecting rods are attached to the thrust plate and revolve with it, unlike the swash plate pump where the piston rods slide past a stationary swash plate. The outlet ports are semi-circular holes in the Valve Plate, shown on the far right of the animation on edge and in a head-on view below, right. As the pump revolves, half the pistons suck in fluid as they pass over the intake port. The other pistons discharge their fluid through the outlet port. This pump should be compared to the radial piston pump, swash plate pump, and wobble pump.