ผลการค้นหา

คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 23 รายการ

 หรือคุณกำลังค้นหา Cement Gel, Addendum, BLEED-OFF, Rock Pocket, Troposphere, Sand (ASTM C125), Butt end, Component reuse, Greenhouse gases

Base Metal

แปลว่า(english) (1) The metal present in the largest proportion in an alloy; (2) the metal to be brazed, cut or welded; (3) after welding the part of the metal that was not melted during the process.

Rock Pocket

แปลว่า(Concrete Engineering) Area or portion of hardened concrete which is deficient in mortar and consisting primarily of coarse aggregate and open voids; caused by insufficient consolidation or separation during placement, or both; by leakage from form.

proportiontely

แปลว่าซึ่งได้ส่วนสัดกันทั้งหมด เช่น ขนาด ดีกรีหรือส่วนสำคัญอื่นๆ ที่ได้ส่วนกัน

Linear Elastic:

แปลว่า(english) A force-displacement relationship which is both linear and elastic. For a structure, this means the deformation is proportional to the loading, and deformations disappear on unloading. For a material, the concept is the same except strain substitutes for deformation, and stress substitutes for load.

mix proportion

แปลว่าสัดส่วนผสม

Troposphere

แปลว่า(Environmental Engineering) The lower atmosphere, from the earth's surface to approximately 12 km. This portion of the earth's atmosphere contains about 95 percent of the atmospheric gases. The temperature gradually declines through this region.

Calcium Aluminate Cement

แปลว่า(Concrete Engineering) The product obtained by pulverizing clinker consisting essentially of hydraulic calcium aluminates resulting from fusing or sintering a suitable proportioned mixture of aluminous and calcareous materials.

Linear:

แปลว่า(english) A structure is said to behave linearly when its the deformation response is directly proportional to the loading (i.e. doubling the load doubles the displacement response). For a material, linear means that the stress is directly proportional to the strain.

Transit-Mixed Concrete

แปลว่า(Concrete Engineering) Concrete produced from a central-batching plant, where the materials are proportioned and placed in truck-mixers for mixing enroute to the job or after arrival there.

proportional limit

แปลว่าพิกัดปฏิภาค

Component reuse

แปลว่า(Software Engineering) the ability to reuse a portion of a model, source code, test case, etc.

proportioning

แปลว่าการกะส่วน, การกำหนดสัดส่วน

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด