ผลการค้นหา

คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 18 รายการ

 หรือคุณกำลังค้นหา Bander, completed circuit, Accm, Ac3, complete all work, Bend Test, Ductility:, Brittle:, Decomposers, Task set

Ac3

แปลว่า(english) In hypoeutectoid steel, the temperature at which transformation of ferrite into austenite is completed upon heating.

complete all outstanding works and remedying defects

แปลว่าการทำให้งานคงค้างและการแก้ไขข้อบกพร่องให้แล้วเสร็จ

Bend Test

แปลว่า(english) Various tests which is used to ascertain the toughness and ductility of a metal product, in which the material is bent around its axis and/ or around an outside radius. A complete test might specify such a bend to be both with and against the direction of grain. For testing, samples should be edge filed to remove burrs and any edgewise cracks resulting from slitting or shearing. If a vice is to be employed, then you must line the jaws with some soft metal, to permit a flow of the metal in the piece being tested.

Ductility:

แปลว่า(english) Ductility generally refers to the amount of inelastic deformation which a material or structure experiences before complete failure. Quantitatively, ductility can be defined as the ratio of the total displacement or strain at failure, divided by the displacement or strain at the elastic limit.

Brittle:

แปลว่า(english) A brittle structure or material exhibits low ductility, meaning that it exhibits very little inelastic deformation before complete failure.

Decomposers

แปลว่า(Environmental Engineering) Organisms which utilize energy from wastes or dead organisms. Decomposers complete the cycle by returning nutrients to the soil or water and carbon dioxide to the air or water.

Bamboo Grain Structure

แปลว่า(english) A structure in wire or sheet in which the boundaries of the grains tend to be aligned normal to the long axis and to extend completely through the thickness.

Task set

แปลว่า(Software Engineering) a collection fo software engineering tasks that are required to complete an activity or action that is part of a software process framework

Bleeder

แปลว่า(english) A defect wherein a casting lacks completeness due to moltn metal draining or leaking out of some part of the mold cavity after pouraing has stopped.

complete construction work

แปลว่าทำงานก่อสร้างแล้วเสร็จ

clutch control complete rod

แปลว่าคันควบคุมคลัทช์

System engineering

แปลว่า(Software Engineering) focuses on the analysis and design of all elements of a complete product, service, or technology for the transformation of information or control

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด