ผลการค้นหา

คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 24 รายการ

 หรือคุณกำลังค้นหา top-coat, scratch coat, three-coat, prime coat, sealing coat, coat

Bonderized Coating

แปลว่า(english) A thin film of phosphate pretreatment applied to a steel surface (bare or zinc coated) to enhance paintability.

A Coatings

แปลว่า(English) Coatings on hot-dipped galvanized steels processed to convert the coating completely to zinc-iron alloys; dull gray in appearance, have no spangle, and after proper preparation, are well suited for painting.

Blow Back

แปลว่า(english) A coating defect consisting of a lower coating film weight on the bottom of the coated sheet caused by high velocity air in the oven. Blow back usually occurs with high solids coatings which have little solvent to evaporate and "set" the film.

coating

แปลว่าการเคลือบ, ผิวเคลือบ [พลาสติก]: การเคลือบ [การพิมพ์]: เคลือบ, ฉาบ [ถ่ายภาพ]: ผิวเคลือบ [อิเล็กทรอนิกส์]

Blush

แปลว่า(english) A coating defect consisting of the whitening of a cured film which results in a translucent or opaque appearance with accompanying loss of gloss. Blushing usually occurs during the pasteurization or steam processing of films which are undercured or water sensitive.

coat

แปลว่าชั้นของสีที่ทา, ฉาบปูน, ทาน้ำยากันชื้น ฯลฯ

Butyl Stearate

แปลว่า(english) (BSO)A lubricant applied on electrolytic chromium coated steel

Blister

แปลว่า(english) 1) Coating defect consisting of the formation of bubbles in a coating, which appear as hemispherical elevations. The blisters are hollow, and are usually caused by entrapped air or solvent. 2) A raised spot on the surface on the surface of metal due to expansion of gas which causes a subsurface metal separation such as inclusions and small laminations.

Brittle Inter-metallic Layer

แปลว่า(english) An iron-zinc alloy layer formed between the steel substrate and the free zinc of galvanized coatings.

Zinc

แปลว่า(english) Chemical Symbol Zn. Element No. 30 of the periodic system; atomic weight 65.38. Blue-white metal; when pure, malleable and ductile even at ordinary temperatures; melting point 787 (degrees) F.; boiling point 1665 (degrees) F., specific gravity 7.14. Can be electrodeposited; it is extensively used as a coating for steel and sheet zinc finds many outlets, such as dry batteries, etc. Zinc-base alloys are of great importance in die casting. Its most important alloy is brass.

Blackening Scab

แปลว่า(english) A form of casting defect related to an improper coating rather than to the sand.

sealing coat

แปลว่าชั้นเคลือบผิวถนน

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด