ตัวกรองผลการค้นหา
Elementary reaction
แปลว่า(Environmental Engineering) A reaction in which the rate expression corresponds to the stoichiometric equation.
Mixing Speed
แปลว่า(Concrete Engineering) Rate of mixer drum rotation or that of the paddles in a pan, open-top, or trough type mixer, when mixing a batch; expressed in revolutions per minute (rpm) or in peripheral] feet per minute of A point on the circumference at maximum diameter.
BALL VALVE
แปลว่า(english) A valve that may be used to divert the flow of fluid in a passage. Most normally configured in a two-way pattern that is either open or closed.
Absorbed Moisture
แปลว่า(Concrete Engineering) Moisture which is mechanically held in a material. In aggregates, that water which is not available to become part of the mixing water is designated "absorbed" water.
Blister 2
แปลว่า(english) A defect in metal, on or near the surface, resulting from the expansion of gas in a subsurface zone. Very small blisters are called pinheads or pepper blisters.
Suspended growth reactor
แปลว่า(Environmental Engineering) A reactor in which the microorganisms are suspended in the wastewater. Examples of suspended growth reactors are activated sludge reactors and anaerobic digesters. See attached growth reactor.
Risk
แปลว่า(Software Engineering) a potential problem or occurrence that put a project in jeopardy ความเสี่ยง
Covalent bond
แปลว่า(Environmental Engineering) A bond in which electrons are shared approximately equally by two atoms.
Jacking Force
แปลว่า(Concrete Engineering) The temporary force exerted by the jacking device which introduces tension into the tendons. Jacking Stress In prestress concrete, the maximum stress occurring in a tendon during stressing.
Air Entraining Agent
แปลว่า(Concrete Engineering) An addition for hydraulic cement, or an admixture for concrete or mortar which entrains air in the form of minute bubbles in the concrete or mortar during mixing.
Bamboo Grain Structure
แปลว่า(english) A structure in wire or sheet in which the boundaries of the grains tend to be aligned normal to the long axis and to extend completely through the thickness.
Bleeding, Bleed Water
แปลว่า(Concrete Engineering) A form of segregation in which some of the water in a mix tends to rise to the surface of freshly placed concrete. Known also as water gain.