ผลการค้นหา

คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 602 รายการ

Line of Action:

แปลว่า(english) The line of action of a force is the infinite line defined by extending along the direction of the force from the point where the force acts.

Greenhouse gases

แปลว่า(Environmental Engineering) Gases which trap solar radiation. Of the solar energy entering the earth's atmosphere a portion is reflected back and a portion penetrates onto the earth's surface. The portion reflected back from the earth's surface is at a different wavelength that when it entered. Carbon dioxide and other gases, which pass solar radiation, absorb this reflected radiation, increasing the earth's temperature. This is much like a greenhouse, hence the name.

Bottom Up

แปลว่า(english) Reversing the wrap of a coil putting the top surface on the bottom.

Bearing Strength

แปลว่า(english) The maximum bearing load at failure divided by the effective bearing area. In a pinned or riveted joint, the iffective area is calculated as the product of the diameter of the hole and the thickness of the bearing member.

Project planning

แปลว่า(Software Engineering) the activity that creates the Project Plan

Brinell Hardness

แปลว่า(english) The hardness of a metal or part, as represented by the number obtained from the ratio between the load applied on the spherical area of the impression made by a steel ball forced into the surface of the material tested.

Burr

แปลว่า(english) The very subtle ridge on the edge of strip steel left by cutting operations such as slitting, trimming, shearing, or blanking. For example, as a steel processor trims the sides of the sheet steel parallel or cuts a sheet of steel into strips, its edges will bend with the direction of the cut.

Bottom Die

แปลว่า(english) The stationary half-die.

Bottom Roll

แปลว่า(english) Submerged roll in the pot used to keep the strip submerged in the pot.

Software metrics

แปลว่า(Software Engineering) quantitative measures of the process or the product

Billet container

แปลว่า(english) The part of the extrusion press into which the billet to be extruded is placed.

Give the right of access to the site

แปลว่าให้สิทธิในการเข้าพื้นที่ก่อสร้าง

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด