ผลการค้นหา

FAST

แปลว่า(Software Engineering) Facilitated application specification techniques, a structured meeting between developer and customer; intent is to define basic requirementsFormal methods

Boiler

แปลว่า(english) A closed vessel in which water, is transformed into steam at a given pressure and temperature under controlled conditions.

Configuration

แปลว่า(Software Engineering) the collection of programs, documents and data that must be controlled when changes are to be madeConfiguration audit

BREATHER

แปลว่า(english) A device which permits air to move in and out of a container or component to maintain atmospheric pressure.

Customer

แปลว่า(Software Engineering) the person or group that has requested the software and will be paying the bill for its development

Acme Thread

แปลว่า(english) A screw thread having a 29 degree included angel. Used largely for feed and adjusting screws on machine tools.

Zirconia

แปลว่า(english) ZrO2 an acid refractory up to 2500 B0C (4532 B0F) having good thermal shock resistance and low electrical resistively.

Change control

แปลว่า(Software Engineering) an umbrella process that enables a project team to accept, evaluate, and act on changes in a systematic manner

Secondary treatment

แปลว่า(Environmental Engineering) In wastewater treatment, the conversion of the suspended, colloidal and dissolved organics remaining after primary treatment into a microbial mass with is then removed in a second sedimentation process. Secondary treatment included both the biological process and the associated sedimentation process.

Hydrogenesis

แปลว่า(Concrete Engineering) Another term for condensation. The term is especially applied to base and soil substrates under highway pavements. where the barometric pump causes the inhalation of humid air, which then condenses in those structures, causing an ever increasing moisture content and sometimes instability.

Bainite

แปลว่า(english) A eutectoid transformation product of ferrite and a fine dispersion of carbide, generally formed at temperatures below 840 to 930 F (450 to 500 C): upper bainite is an aggregate containing parallel lath-shape units of ferrite, produces the so-called feathery appearance in optical microscopy, and is formed at temperatures above about 660 F (350 C); lower bainite consists of individual plate-shape units and is formed at temperatures below about 660 F (350 C). Also, a slender, needle-like (acicular) microstructure appearing in spring steel strip characterized by toughness and greater ductility than tempered Martensite. Bainite is a decomposition product of Austenite best developed at interrupted holding temperatures below those forming fine pearlite and above those giving Martensite.

In situ treatment

แปลว่า(Environmental Engineering) Treatment of a waste in place, as opposed to pumping or digging the waste up and then treating it.