ตัวกรองผลการค้นหา
Shear modulus:
แปลว่า(english) The ratio of shear stress divided by the corresponding shear strain in a linear elastic material.
Total solids
แปลว่า(Environmental Engineering) (TS) is the amount of organic and inorganic matter which is contained in a water.
Non-evaporable Water
แปลว่า(Concrete Engineering) The water in concrete which is irremovable by oven drying; chemically combined during cement hydration.
Ac3
แปลว่า(english) In hypoeutectoid steel, the temperature at which transformation of ferrite into austenite is completed upon heating.
Carbonaceous biochemical oxygen demand (CBOD)
แปลว่า(Environmental Engineering) The amount of oxygen required to oxidize any carbon containing matter present in a water.
Gillmore Needle
แปลว่า(Concrete Engineering) A device used in determining time of setting of hydraulic cement, described in ASTM 0 266. Gradation The sizing of granular materials; for concrete materials, usually expressed in terms of cumulative percentages larger or smaller than each of a series of sieve openings or the percentages between certain ranges of sieve openings.
Blast Furnace
แปลว่า(english) 1) A furnace in which solid fuel (limestone, coke, iron ore) is combined with high-pressure, hot air blast (120,000 psi) to smelt ore in a continuous process (They are never stopped. They can be slowed down or idled). A Blast Furnace in the iron and steel industry is used to produce liquid iron.
Groundwater
แปลว่า(Environmental Engineering) Water which is contained in geologic strata. Also properly written as two words, ground water.
Backward Extrusion
แปลว่า(english) Forcing metal to flow in a direction opposite to the motion of a punch or die.
Bright Dip
แปลว่า(english) An acid solution into which pieces are dipped in order to obtain a clean, bright surface.
Truck Mixer
แปลว่า(Concrete Engineering) A concrete mixer capable of mixing concrete in transit when mounted on a truck chassis.
Base Metal
แปลว่า(english) (1) The metal present in the largest proportion in an alloy; (2) the metal to be brazed, cut or welded; (3) after welding the part of the metal that was not melted during the process.